Ara mostrant els elements 55-74 de 80
Martínez Martínez, Borja (Data de defensa: 2024-01-11)
(English) The primary goal of this thesis is to unlock the potential of hemp stalk, an agricultural byproduct that currently lacks practical applications. The overarching aim is to promote the use of eco-friendly materials, ...
Zhao, Weiqiang (Data de defensa: 2021-07-21)
As a type of renewable energy that can provide rapid response to the requirement of the power grid, hydropower plays a fairly important position in the energy market. In recent years, with the enormous entrance of new ...
Genovese, Pablo A. (Pablo Alberto) (Data de defensa: 2013-09-03)
La motivació d'aquesta tesi és entendre com pot ser gestionada la integració de coneixement en projectes de subcontractació estratègica de disseny de producte. Una participació activa de l'empresa durant la realització de ...
Loaiza Duque, Julián David (Data de defensa: 2023-10-27)
(English) The most common tremor disorders worldwide are Parkinson's Disease and Essential Tremor. The gold standard for diagnosing these movement disorders is medical evaluation by neurologists, but its accuracy depends ...
Català, Pau (Data de defensa: 2014-05-06)
This thesis presents the dynamic study of conjugate cam mechanisms with rollers follower and translational movement, to design them with the aim of retard the surface fatigue failure in the rollers. The premature failure ...
Karimi, Shadi (Data de defensa: 2020-05-11)
The research is motivated by real applications, such as pasteurization plant, water networks and autonomous system, which each of them require a specific control system to provide proper management able to take into account ...
Mehrdel, Pouya (Data de defensa: 2021-09-14)
Over the past decade, microfluidic technology has proven its capabilities to start bringing detection and quantification capacities to novel miniaturized devices. The current generation of microfluidic platforms provide ...
Herranz Alvarez, Juan F. (Data de defensa: 2016-02-29)
The particle production of an accelerator is characterised by the accelerated species of particles, by their number and energy. The particle rate is determined by the production cross section, a natural constant and the ...
García Vilana, Silvia (Data de defensa: 2021-02-04)
In this document, a non-linear constitutive model with micro-cracking and irreversibility is proposed for cortical bone of the human rib, extended with a stochastic fracture model, based on acoustic emission. Both models ...
Farré Lladós, Josep (Data de defensa: 2015-04-28)
Manufacturers of wind turbines have observed a new phenomenon that appears in high power wind turbines: excessive wear in the teeth located at 0º in the pitch bearing. In order to design more efficient wind turbines, ...
Geng, Linlin (Data de defensa: 2021-01-28)
Cloud cavitation is a unwanted phenomenon taking place in many hydraulic machines which damages the surfaces of the solid walls due to the erosive aggressiveness induced by the collapse process. Therefore, it is necessary ...
Roca Cazorla, David (Data de defensa: 2020-09-07)
The notion of metamaterials as artificially engineered structures designed to obtain specific material properties, typically unachievable in naturally occurring materials, has captured the attention of the scientific and ...
Torre Sangrà, David de la (Data de defensa: 2020-07-28)
Interplanetary travel is a difficult task due to the high fuel mass required to reach other planets. Minimizing the cost of the manoeuvres (and, in turn, the fuel mass) is the objective preliminary mission design. During ...
Torrent Gelmà, Miquel (Data de defensa: 2023-03-31)
(English) Pumps of positive volumetric displacement (PDVP) drive a volume of fluid from suction to discharge for each revolution of its shaft, called derived capacity, and therefore, in an ideal constant capacity pump the ...
Martín Román, Sara-Regina (Data de defensa: 2013-07-15)
The present thesis investigates a passive acoustic method to locate maneuvering aircraft. The method is based on the acoustical Doppler effect, as a particular effect of the signals received by a mesh of spatially distributed ...
Baghaei, Masoud (Data de defensa: 2020-07-24)
One of the main advantages of fluidic oscillators is that they do not have moving parts, which brings high reliability whenever being used in real applications. To use these devices in real applications, it is necessary ...
Rallo Tolós, Héctor (Data de defensa: 2021-02-09)
The mobility of the future undoubtedly involves the electrification of vehicles. The increase in social awareness towards a reduction in CO2 emissions, together with the introduction of new laws regulating them, has finally ...
Sarabandi, Soheil (Data de defensa: 2021-04-27)
Since the map from quaternions to rotation matrices is a 2-to-1 covering map, this map cannot be smoothly inverted. As a consequence, it is sometimes erroneously assumed that all inversions should necessarily contain ...
Awan, Muhammad Rizwan (Data de defensa: 2021-11-02)
The aim of this research is to provide an in-depth understanding of energy consumption in abrasive disc cutting processes. The specific energy consumed in cutting is measured,analysed, and then characterised in to three ...
Jerez Mesa, Ramón (Data de defensa: 2018-03-02)
This dissertation is an experimental research project into the mechanical effects of the ultrasonic vibration-assisted ball burnishing process on the surface integrity of surfaces machined through ball-end milling. Due to ...