Bagudanch Frigolé, Isabel (Date of defense: 2017-11-16)
Incremental Sheet Forming (ISF) technology has been mainly applied on metallic sheets during the last years. ISF is used due to its flexibility, low costs, low batch production, production of complex ...
Comamala Laguna, Martí (Date of defense: 2019-07-31)
Since the beginnings of the automotive driven with internal combustion engines all the cycles used in the alternative motors share a thermal characteristic, a large amount of heat released by the fuel ...
Simon Madrenas, Enric (Date of defense: 2021-11-17)
Elastoplastic energy dissipators are used in earthquake-resistant design in order to dissipate a substantial part of the seismic energy acting on a building. They are elements that are not part of the ...
Sans Canovas, Daniel (Date of defense: 2013-06-26)
The use of composite materials in industrial applications such as aeronautical, aerospace or wind energy production has greatly increased in recent decades. Due to their inherent properties, these ...
Sebaey Abdella, Tamer Ali Abdella (Date of defense: 2013-01-11)
The main objective of the thesis is to assess the damage resistance and damage tolerance of the non-conventional dispersed laminates and compare the response with the conventional ones. However, part ...
Marín Hernández, Lorena (Date of defense: 2015-11-13)
In the common design and certification process, a large number of experimental tests, going from small specimens to the full structure, are performed. In these tests, the environmental conditions, ...
Wagih Abdallah Abdel Hady, Ahmed (Date of defense: 2018-05-28)
The objective of the thesis is to provide scaling tool predicting the response of composite structures under out-of-plane loading by testing small coupons. This global objective cannot be achieved without ...
Emara, Mohamed Reda Ali Elewa (Date of defense: 2018-04-17)
The main objective of work has been to study the bond strength and bond-slip response of NSM CFRP strips in concrete when subjected to sustained loading under different environmental conditions. To this ...
Moawad, Mohamed Abdalla Mohamed Mohamed (Date of defense: 2020-07-30)
The main objective of this work is to study the long-term and residual flexura! strength of Near Surface Mounted (NSM) strengthened Reinforced Concrete (RC) beams with Carbon Fiber Reinforced Polymers ...
Ortega Novillo, Adrián (Date of defense: 2017-04-20)
When a fibre-reinforced composite laminate is subjected to traction or compression, it develops a relatively large Fracture Process Zone where material toughening mechanisms such as ...