Now showing items 21-40 of 75

    Suitability of different RANS models in the description of turbulent forced convection flows: application to air curtains 

    Jaramillo Ibarra, Julián Ernesto (Date of defense: 2008-10-17)

    The main motivation of this thesis is the analysis of turbulent flows. Turbulence plays an important role in engineering applications due to the fact that most flows in industrial equipment and surroundings are in turbulent ...

    Numerical simulation of the thermal and fluid dynamics behaviour of liquid-vapour two-phase flow in evaporators and condensers 

    Morales Ruiz, Sergio (Date of defense: 2009-06-18)

    Un estudio numérico del comportamiento térmico y fluido-dinámico de flujos bifásicos, liquido-gas, en conductos es presentado. El análisis numérico es basado en dos diferentes modelos. El primer modelo es conocido como ...

    Curat tèrmic i fotocurat de resines epoxi per al control químic de la contracció i millora de la degradabilitat 

    Fernández Francos, Xavier (Date of defense: 2009-07-10)

    S’ha estudiat la copolimerització de resines epoxi amb una spirobislactona com a comonòmer per tal de controlar la contracció química durant el curat i millorar la seva degradabilitat per tal d’afavorir la seva recuperació ...

    Numerical simulation and experimental validation of vapor compression refrigerating systems: special emphasis on natural refrigerants 

    Ablanque Mejía, Nicolás (Date of defense: 2010-07-21)

    The aim of this work is to study the thermal and fluid-dynamic behavior of vapor compression refrigerating systems and their constitutive elements (heat exchangers, expansion devices, compressors and connecting tubes) ...

    Performance indicators for the dynamics modeling and control of PEMFC systems 

    Husar, Attila Peter (Date of defense: 2012-03-07)

    Society is gradually becoming aware that the current energy industry, based on the use of fossil fuels, is inefficient, highly polluting and has a finite supply. Within the scientific community, there are indications ...

    Numerical resolution of turbulent flows on complex geometries. 

    Lehmkuhl Barba, Oriol (Date of defense: 2012-07-26)

    This thesis aims at developing a numerical methodology suitable for the direct numerical simulation (DNS) and large-eddy simulation (LES) of turbulent flows in order to be used in complex flows, currently encountered in ...

    Numerical analysis and experimental studies of vapour compression refrigerating systems: special emphasis on different cycle configurations 

    Sadurní Caballol, Alexandre (Date of defense: 2012-09-28)

    The aim of this work is to study the thermal behavior and fluid-dynamic systems, vapor compression refrigeration and its components (heat exchangers, expansion devices, compressors, connecting pipes, pumps and pressure ...

    Parallel algorithms for computational fluid dynamics on unstructured meshes 

    Borrell Pol, Ricard (Date of defense: 2012-10-31)

    La simulació numèrica directa (DNS) de fluxos complexes és actualment una utopia per la majoria d'aplicacions industrials ja que els requeriments computacionals son massa elevats. Donat un flux, la diferència entre els ...

    Analysis of night-time climate in plastic-covered grenhouses 

    Piscia, Davide (Date of defense: 2012-12-18)

    Este trabajo analiza el clima nocturno del invernadero. EL objeto del estudio es el invernadero de plástico sin calefacción, cuyo clima se estudia utilizando modelos CFD, modelos basados en los balance de energía (ES) y s ...

    Numerical modelling of a parabolic trough solar collector 

    Hachicha, Ahmed Amine (Date of defense: 2013-09-30)

    Concentrated Solar Power (CSP) technologies are gaining increasing interest in electricity generation due to the good potential for scaling up renewable energy at the utility level. Parabolic trough solar collector (PTC) ...

    Numerical and experimental study of a flat plate collector with honeycomb transparent insulation and overheating protection system 

    Kessentini, Hamdi (Date of defense: 2014-02-14)

    In this thesis a flat plate collector (FPC) with plastic transparent insulation materials (TIM) and a low-cost overheating protection system destined for heat supply from 80 to 120°C is presented. A ventilation channel ...

    Study of the exfoliation process in epoxy-clay nanocomposites 

    Shiravand, Fatemeh (Date of defense: 2014-06-03)

    Cured epoxy resins are highly cross-linked polymers which are increasingly important in high performance engineering field due to the stiffness, high strength, heat resistance and solvent resistance. However one major ...

    Numerical simulation of multiphase immiscible flow on unstructured meshes 

    Jofre Cruanyes, Lluís (Date of defense: 2014-07-25)

    The present thesis aims at developing a basis for the numerical simulation of multiphase flows of immiscible fluids. This approach, although limited by the computational power of the present computers, is potentially very ...

    Three-dimensional numerical simulation of fluid flow and heat transfer in fin-and-tube heat exchangers at different flow regimes 

    Paniagua Sánchez, Leslye (Date of defense: 2014-07-30)

    This thesis aims at unifying two distinct branches of work within the Heat Transfer Technological Center (CTTC). On one side, extensive experimental work has been done during the past years by the researchers of the ...

    Numerical simulation of multiphase flows : level-set techniques 

    Balcázar Arciniega, Néstor Vinicio (Date of defense: 2014-09-30)

    This thesis aims at developing numerical methods based on level-set techniques suitable for the direct numerical simulation (DNS) of free surface and interfacial flows, in order to be used on basic research and industrial ...

    Numerical investigation of particle-fluid interaction system based on discrete element method 

    Zhang, Hao (Date of defense: 2014-11-28)

    This thesis focuses on the numerical investigation of the particle-fluid systems based on the Discrete Element Method (DEM). The whole thesis consists of three parts, in each part we have coupled the DEM with different ...

    Energy efficient ventilation strategies for surgery rooms 

    Cubí Montanyà, Eduard (Date of defense: 2014-12-19)

    Surgery rooms are a space type with particularly stringent indoor environmental quality (IEQ) requirements, which translate into high energy use. Due to the unclear IEQ and infection control requirements for surgery rooms ...

    Numerical simulations of thermal storage systems : emphasis on latent energy storage using phase change materials (PCM) 

    Galione Klot, Pedro Andrés (Date of defense: 2014-12-23)

    The present thesis aims at studying the use of phase change materials (PCM) in thermal energy storage (TES) applications and to develop and implement numerical tools for their evaluation. Numerical analysis is nowadays an ...

    Numerical study and experimental optimization of air curtains 

    Giráldez García, Héctor (Date of defense: 2015-04-17)

    he main objective of the present thesis is to study and optimize the sealing efficiency of air curtains. Therefore, the phenomenology of the breakthrough and the parameters which affect it has been studied. However, ...

    Modelling and experimental validation of water vapor absorption by falling films of LiBr aqueous solution under wave regimes conditions and presence of non-absorbable gases 

    García Rivera, Eduardo (Date of defense: 2015-04-17)

    Esta tesis se centra en el estudio de los diferentes mecanismos implicados en la absorción de vapor de agua en películas descendentes de configuración vertical (tipica configuracion para absorbedores enfriados por aire) ...