New strategies in metal oxide nanowire based gas sensors

Author

Shao, Feng

Director

Hernández Ramírez, Francisco

López, Núria (López Alonso)

Tutor

Cornet i Calveras, Albert

Date of defense

2014-01-31

Legal Deposit

B 15036-2014

Pages

150 p.



Department/Institute

Universitat de Barcelona. Departament d'Electrònica

Abstract

This thesis presents the results of applying new strategies to understand the mechanism and explore the sensing performance of metal oxide (MOX) nanowire based gas sensors by testing individual nanowire gas sensors, running density functional theory (DFT) calculations, using new materials, applying ex-situ analysis and temperature-pulsed operation mode. These MOX nanowires include SnO2, CuO decorated SnO2, CuO and ZnO, electrically contacted either individually or in bundles. With SnO2-NH3 as a model system, DFT calculations were made to draw the pictures of surface-gas interactions, which were combined with empirical modeling of individual nanowire sensors to determine the sensing mechanism of this system. The surface reaction routine that involves non lattice oxygen was found to responsible for the sensing effect. As an interfering substance to NH3 sensing, H2O was also studied in this approach. At the new material front, CuO decorated SnO2 nanowire showed significantly increased sensitivity toward H2S while keeping other gases, e.g., CO and NH3 low, offering good selectivity to this gas. Ex-situ analysis has shown that sulfurization and desulfurization reactions happened on CuO, confirming the charge transport channel depletion model proposed for this material. The less common p-type CuO was obtained with the facile thermal oxidation method. NH3, H2S and NO2 sensing have all indicated the key role of surface adsorbed oxygen species in its gas sensing. Due to its intrinsic property, the ZnO nanowires assembled onto micro hot plate (μHP) substrates by dielectrophoretic (DEP) alignment showed relative NH3 selectivity from CO. When operated in temperature-pulsed mode, sensitivity enhancement was seen at the low temperature end. Such effect was ascribed to the fast regulation of surface oxygen, H2O and NO2 in the pulsed mode. The current dissertation is organized as follows: Chapter 1 introduces the general background of the MOX gas sensors and the basic idea of computational chemistry. Chapter 2 gives a brief introduction to density functional theory, which is the major theoretical tool in this work. Chapter 3 describes the experimental and theoretical techniques that have been applied. Chapter 4 deals with the NH3/H2O sensing of SnO2 nanowire, DFT calculations and empirical modeling. The sensing mechanism of NH3 by SnO2 and the interfering principle of H2O were unveiled. Chapter 5 reports the H2S sensing of SnO2 and CuO decorated SnO2 nanowires and the study of the corresponding mechanisms. Chapter 6 explores the NH3, H2S and NO2 sensing properties of the individual CuO nanowire. The importance of surface oxygen species in gas sensing was demonstrated. Chapter 7 is about the DEP deposition of ZnO nanowires onto the μHP sensing substrate and the NH3 sensing in isothermal and temperature-pulsed mode. Chapter 8 reviews the present work, highlighting the main achievements and proposes future directions.


Aquesta tesi se centra en l’estudi dels mecanismes de detecció de gasos amb sensors basats en nanofils d’òxids metàl•lics. Amb aquest objectiu, s’han estudiat les respostes de sensors formats per un únic nanofil, s’ha modelitzat la seva resposta mitjançant càlculs DFT (Density Functional Theory) i s’han analitzat nous materials i explorat modes de funcionament no estàndards com és el polsat de temperatura. Als tres primers capítols de la dissertació se’n fa una introducció als dispositius basats amb òxids metàl•lics, es revisen els fonaments teòrics que hi ha darrera de les simulacions DFT i es presenten els mètodes experimentals que s’han fet servir per completar aquest treball doctoral. El quart capítol se n’ocupa de les interaccions del sistema SnO2-NH3 mitjançant la combinació de càlculs teòrics amb DFT i dades experimentals. Es presenta i valida el mecanisme de detecció de l’amoníac amb l’òxid d’estany així com es discuteix les interferències d’aquest contaminant amb la humitat. Al cinquè capítol es presenta la detecció de H2S amb heteroestructures formades per nanofils de SnO2 decorats amb nanopartícules de CuO. La gran sensitivitat a aquest gas que es troba experimentalment, especialment si es compara amb les respostes típiques obtingudes amb nanofils no decorats, s’ha analitzat i modelitzat. El capítol sisè explora la utilització d’òxid de coure, un semiconductor tipus p, com a sensor de gas; i les seves respostes a diferents contaminants es comparen amb les obtingudes amb l’òxid d’estany, el semiconductor tipus n de referència. Ja al capítol setè, es presenta el dipòsit controlat de nanofils de ZnO sobre hotplates mitjançant dielectroforesi (DEP) així com la millora de la sensitivitat quan els dispositius obtinguts són operats en mode de temperatura polsada. Finalment, el capítol vuitè i últim resumeix tots els capítols anteriors destacant els resultats més significatius aconseguits, i s’exploren noves línies de treball per a futures tesis.

Keywords

Electrònica; Electrónica; Electronics; Materials nanoestructurats; Materiales nanoestructurados; Nanostructured materials; Detectors; Detectores; Òxids metàl·lics; Oxidos metálicos; Metallic oxides; Teoría del funcional de la densidad (DFT); Teoria del funcional de la densitat (DFT); Density functional theory (DFT)

Subjects

53 - Physics

Knowledge Area

Ciències Experimentals i Matemàtiques

Documents

FENG_SHAO_PhD_THESIS.pdf

4.112Mb

 

Rights

ADVERTIMENT. L'accés als continguts d'aquesta tesi doctoral i la seva utilització ha de respectar els drets de la persona autora. Pot ser utilitzada per a consulta o estudi personal, així com en activitats o materials d'investigació i docència en els termes establerts a l'art. 32 del Text Refós de la Llei de Propietat Intel·lectual (RDL 1/1996). Per altres utilitzacions es requereix l'autorització prèvia i expressa de la persona autora. En qualsevol cas, en la utilització dels seus continguts caldrà indicar de forma clara el nom i cognoms de la persona autora i el títol de la tesi doctoral. No s'autoritza la seva reproducció o altres formes d'explotació efectuades amb finalitats de lucre ni la seva comunicació pública des d'un lloc aliè al servei TDX. Tampoc s'autoritza la presentació del seu contingut en una finestra o marc aliè a TDX (framing). Aquesta reserva de drets afecta tant als continguts de la tesi com als seus resums i índexs.

This item appears in the following Collection(s)