2024-03-29T12:56:00Zhttps://www.tdx.cat/oai/requestoai:www.tdx.cat:10803/4820912018-04-18T12:12:36Zcom_10803_253col_10803_267
Development and study of nanocrystalline and amorphous soft-ferromagnetic alloys
Bonastre i Muñoz, Jordi
Suñol Martínez, Joan Josep
Universitat de Girona. Departament de Física
Mechanical alloys
Aleado mecánico
Aliatge mecànic
Nanocrystalline metal alloys
Aleaciones metálicas nanocristalinas
Aliatges metàl·lics nanocristal·lins
Soft ferromagnetic alloys
Aleaciones ferromagnéticas blandas
Aliatges ferromagnètics tous
Amorphous metal alloys
Aleaciones metálicas amorfas
Aliatges metàl·lics amorfes
536
This thesis deals with the production, characterization and analysis of Fe and Co based nanocrystalline and amorphous soft-ferromagnetic alloys, alloys showing ferromagnetic hysteresis cycles with low energy losses, produced by the mechanical alloying (MA) and the melt spinning (MS) techniques.
The study focus firstly on nanocrystalline alloys produced by MA from commercially available pure elements in powder form and later with alloys produced by milling of amorphous alloys previously produced in ribbon by the MS. The respective structural and magnetical properties are compared, including also an study of the anisotropy induced by the presence of an external magnetic field during the cooling process in the MS cases.
Esta tesis trata sobre la producción, caracterización y análisis de aleaciones nanocristalinas y amorfas de base Fe y Co y comportamiento ferromagnético blando, aleaciones que presentan ciclos de histéresis magnética con bajas pérdidas de energía, producidos mediante la técnica del aleado mecánico (mechanical alloying o MA) y del melt spinning (MS).
El análisis se centra primero en aleaciones producidas a partir de los elementos en forma de polvo de gran pureza disponibles comercialmente, de las que se discute sus características y propiedades estructurales y magnéticas, así como el proceso de producción mismo. Posteriormente se estudian también aleaciones producidas por molienda de cintas amorfas previamente producidas por solidificación rápida mediante la técnica del melt spinning (MS). Se comparan sus respectivas propiedades estructurales y magnéticas, incluyendo también un estudio de la anisotropía inducida por la presencia de campos magnéticos externos durante el proceso de enfriamiento.
2018-04-18T11:40:56Z
2018-04-18T11:40:56Z
2018-01-15
info:eu-repo/semantics/doctoralThesis
info:eu-repo/semantics/publishedVersion
http://hdl.handle.net/10803/482091
eng
L'accés als continguts d'aquesta tesi queda condicionat a l'acceptació de les condicions d'ús establertes per la següent llicència Creative Commons: http://creativecommons.org/licenses/by/4.0/
info:eu-repo/semantics/openAccess
172 p.
application/pdf
application/pdf
Universitat de Girona
TDX (Tesis Doctorals en Xarxa)