Protección ultravioleta proporcionada por los textiles:estudio de la influencia de las variables más significativas y aplicación de productos específicos para su mejora

Author

Algaba Joaquín, Inés M.

Director

Riva Juan, Ascensión

Date of defense

2005-03-15

ISBN

9788469056257

Legal Deposit

B.25521-2007



Department/Institute

Universitat Politècnica de Catalunya. Departament d'Enginyeria Tèxtil i Paperera

Abstract

La componente ultravioleta de la radiación solar, beneficiosa a pequeñas dosis, puede ser muy nociva por su efecto acumulativo sobre la piel. Los dermatólogos aconsejan protegerse de cantidades excesivas de radiación UV. Generalmente se piensa en la protección de la piel no cubierta, pero hay que tener en cuenta también la protección proporcionada por los tejidos, en particular en prendas ligeras.<br/>El objetivo de esta tesis doctoral es el estudio de la protección ultravioleta proporcionada por los tejidos. Mediante diversas técnicas, fundamentalmente la determinación de la transmitancia espectral difusa de radiación ultravioleta, se estudia la influencia de las variables más significativas de las que depende el factor de protección ultravioleta (UPF) de los tejidos.<br/>En la primera parte de la tesis, se trata la influencia de la estructura del tejido sobre el UPF. Mediante técnicas estadísticas de planificación de experiencias, se han diseñado tres series de tejidos de Algodón, Modal y Modal Sun, formadas por 27 muestras con una gradación en su estructura. La compacidad del tejido tiene una importante influencia sobre el bloqueo de la radiación UV y el análisis estadístico de los resultados permite su cuantificación. Se obtienen modelos estadísticos que relacionan el UPF de los tejidos con algunos de los principales parámetros de fabricación (título del hilo de urdimbre, título del hilo de trama y densidad de pasadas). Asimismo, se modeliza la influencia sobre el UPF de otros parámetros estructurales de amplio uso en la industria textil (peso por unidad de superficie, cobertura y espesor). Debido a que los resultados muestran que el UPF puede variar muy significativamente en función del tipo de fibra, mediante la técnica FT-IR se analiza la causa del diferente comportamiento de las tres fibras. <br/>También se ha estudiado la influencia de las condiciones de uso de las prendas. El UPF puede variar cuando los tejidos se llevan en estado mojado o cuando son sometidos a las tensiones habituales en su contacto con el cuerpo. Se ha obtenido un modelo estadístico para cada fibra que cuantifica la variación del UPF en función de la tensión y humedad, así como del UPF inicial del tejido en estado relajado y seco (representante de la estructura inicial).<br/>A partir de tejidos seleccionados en la primera parte, se ha estudiado la aplicación de algunos productos textiles que pueden mejorar el nivel de protección.<br/>Se ha estudiado la influencia de la coloración sobre el UPF. Aunque cuando se habla de color se piensa en la región del visible, el espectro de absorción de colorantes también se extiende a las longitudes de onda del UV, por lo que pueden mejorar el UPF. Para cuantificar la influencia de este parámetro, se han aplicado tres colorantes, de una tricromía de colorantes directos, a diferentes concentraciones sobre varios tejidos de Algodón, Modal y Modal Sun, obteniéndose muestras con una gradación de color correspondiente a diferentes intensidades estándar. <br/>Se analiza también la influencia de la aplicación, a varias concentraciones, de dos blanqueadores ópticos de diferente estructura química. Estos productos pueden disminuir la transmisión en el UV debido a su capacidad de absorber este tipo de radiación. <br/>Del mismo modo se estudia la mejora del UPF mediante el tratamiento con un producto de acabado absorbente de radiación UV, en función de su concentración. Como complemento a este estudio, las imágenes SEM permiten dilucidar si el tratamiento produce modificaciones en la superficie de la fibra. También se analiza la permanencia del efecto de acabado y el impacto ecotoxicológico del tratamiento con el producto.<br/>En todos los casos, se han obtenido modelos estadísticos que relacionan el valor de la respuesta UPF con las variables de control en cada una de las partes: el tipo de colorante/blanqueador óptico, la intensidad de la tintura/concentración de producto y el UPF inicial del tejido. Los modelos permiten diseñar tejidos con UPF preestablecido.


The ultraviolet component of the solar radiation, beneficial in small doses, can be very harmful due to its accumulative effect on the skin. Dermatologists recommend the protection of the skin against excessive amounts of UV radiation. Generally, people think in the protection of the uncovered skin, but the protection provided by fabrics should be also taken into account, particularly in light garments.<br/>The objective of this doctoral thesis is the study of the ultraviolet protection provided by textiles. By the use of several techniques, fundamentally the determination of the diffuse spectral transmittance of the ultraviolet radiation, the influence of the more significant variables on the ultraviolet protection factor of the fabrics (UPF) is studied. <br/>The first part of the thesis deals with the influence of the fabric structure on the UPF. By means of statistical techniques for experiments planning, three sets of fabrics made with Cotton, Modal and Modal Sun are designed. Each set is composed by 27 samples of fabrics with a gradation in their structure. The compaction of the fabric has shown to have an important influence on the blocking of the ultraviolet radiation and the statistical analysis makes possible its quantification. Three statistical models, one for each fibre type, that describe the UPF of the fabrics as a function of some of the main manufacturing parameters (warp yarn number, weft yarn number and weft thread count) have been obtained. Likewise, the influence of other structural parameters widely used in the textile industry (weight per surface unit, percent cover and thickness) on the UPF is modelled. Due to the fact that the results show that the UPF can vary very significantly because of the type of fibre, the cause of the different behaviour of the three studied fibres is analysed by the FT-IR technique. <br/>The influence of the wearing conditions of the garments has been studied as well. The UPF can vary when the fabrics are worn in wet state or when they underwent the usual tensions in their contact with the body. A statistical model for each fibre has been obtained, which quantifies the variation of the UPF due to the tension, wetness and the initial UPF of the fabric in relaxed and dry state (which represents the initial structure of the fabric). <br/>Taking some fabrics selected in the first part of the thesis, the application of some textile chemicals that can improve the protection level has been investigated. <br/>The influence of the coloration on the UPF of the fabrics has been studied. Although when speaking about colour one thinks in the visible range of wavelengths, the absorption spectra of the dyestuffs extends in some part to the UV wavelengths, so they are likely to improve the UPF. To quantify the influence of the colour on the UPF, three dyes of a trichromie of direct dyes have been applied under different concentrations to fabrics made with Cotton, Modal and Modal Sun, therefore obtaining samples with a gradation in colour corresponding to different standard intensities.<br/>The influence of the application under several concentrations of two whitening agents of different chemical structure has been as well analysed. These chemicals are likely to decrease the transmittance in the UV region due to their capability to absorb this range of radiation.<br/>Likewise, the improvement on the UPF by means of the finishing treatment with an UV absorber under different concentrations has been studied. As a complement to this study, SEM images have been obtained to determine if the treatment produces a modification of the fibre surface. The permanence of the finishing effect and the ecotoxicological impact of the treatment with the UV absorber have been as well analysed.<br/>In all the cases, statistics has been use to model the relationship between the response UPF and the control variables in each one of the different parts of the study: the type of dyestuff / whitening agent, the dyeing intensity / concentration of the chemical and the initial UPF of the fabric. The models allow to design fabrics with a pre-established UPF.

Keywords

algodón; fibra celulósica; tejidos; UPF; factor de proteccion a la radiacion ultravioleta; radiacion ultravioleta; Modal; Modal Sun

Subjects

67 - Various industries, trades and crafts

Documents

01IMaj01de11.pdf

55.81Kb

02IMaj02de11.pdf

125.4Kb

03IMaj03de11.pdf

1.147Mb

04IMaj04de11.pdf

3.738Mb

05IMaj05de11.pdf

3.203Mb

06IMaj06de11.pdf

2.348Mb

07IMaj07de11.pdf

2.492Mb

08IMaj08de11.pdf

4.700Mb

09IMaj09de11.pdf

116.2Kb

10IMaj10de11.pdf

355.6Kb

11IMaj11de11.pdf

138.3Kb

 

Rights

ADVERTIMENT. L'accés als continguts d'aquesta tesi doctoral i la seva utilització ha de respectar els drets de la persona autora. Pot ser utilitzada per a consulta o estudi personal, així com en activitats o materials d'investigació i docència en els termes establerts a l'art. 32 del Text Refós de la Llei de Propietat Intel·lectual (RDL 1/1996). Per altres utilitzacions es requereix l'autorització prèvia i expressa de la persona autora. En qualsevol cas, en la utilització dels seus continguts caldrà indicar de forma clara el nom i cognoms de la persona autora i el títol de la tesi doctoral. No s'autoritza la seva reproducció o altres formes d'explotació efectuades amb finalitats de lucre ni la seva comunicació pública des d'un lloc aliè al servei TDX. Tampoc s'autoritza la presentació del seu contingut en una finestra o marc aliè a TDX (framing). Aquesta reserva de drets afecta tant als continguts de la tesi com als seus resums i índexs.

This item appears in the following Collection(s)