Estructuras eléctricas para la integración de un sistema de generación eólica a la red eléctrica

Author

Bahamonde, Freddy Flores

Director

Valderrama-Blavi, Hugo

Date of defense

2013-12-05

Legal Deposit

T 547-2014

Pages

197 p.



Department/Institute

Universitat Rovira i Virgili. Departament d'Enginyeria Electrònica, Elèctrica i Automàtica

Abstract

Wind power generation has become one of the most important energy sources. Currently, due to the advances achieved in power electronics and vertical-axis small wind-turbines, the urban integration of wind-energy has increased considerably. In this work, three three-phase rectifiers are proposed to inject the energy from a permanent magnet synchronous generator to a microgrid DC-bus. By means of sliding mode control these architectures are modeled as a three-phase Loss Free Resistor allowing the power factor correction in each phase and obtaining a modular and redundant implementation. However, due to the cost of the microgrids implementation, a boost inverter is proposed to obtain the most basic configuration for grid-connection. Using the boost inverter a sinusoidal output waveform can be obtained for input voltages lower than mains voltage. Finally, the DC voltage and the DC-link capacitor can be adjusted in order to optimize the global efficiency.


Wind power generation has become one of the most important energy sources. Currently, due to the advances achieved in power electronics and vertical-axis small wind-turbines, the urban integration of wind-energy has increased considerably. In this work, three three-phase rectifiers are proposed to inject the energy from a permanent magnet synchronous generator to a microgrid DC-bus. By means of sliding mode control these architectures are modeled as a three-phase Loss Free Resistor allowing the power factor correction in each phase and obtaining a modular and redundant implementation. However, due to the cost of the microgrids implementation, a boost inverter is proposed to obtain the most basic configuration for grid-connection. Using the boost inverter a sinusoidal output waveform can be obtained for input voltages lower than mains voltage. Finally, the DC voltage and the DC-link capacitor can be adjusted in order to optimize the global efficiency.

Keywords

Energía Eólica; Rectificadores Controlados; Resistor libre de pérdidas trifásico; Control en modos deslizantes; Inversor elevador

Subjects

62 - Engineering. Technology in general; 621.3 Electrical engineering

Documents

DocTesis_FreddyFloresBahamonde.pdf

10.73Mb

 

Rights

ADVERTIMENT. L'accés als continguts d'aquesta tesi doctoral i la seva utilització ha de respectar els drets de la persona autora. Pot ser utilitzada per a consulta o estudi personal, així com en activitats o materials d'investigació i docència en els termes establerts a l'art. 32 del Text Refós de la Llei de Propietat Intel·lectual (RDL 1/1996). Per altres utilitzacions es requereix l'autorització prèvia i expressa de la persona autora. En qualsevol cas, en la utilització dels seus continguts caldrà indicar de forma clara el nom i cognoms de la persona autora i el títol de la tesi doctoral. No s'autoritza la seva reproducció o altres formes d'explotació efectuades amb finalitats de lucre ni la seva comunicació pública des d'un lloc aliè al servei TDX. Tampoc s'autoritza la presentació del seu contingut en una finestra o marc aliè a TDX (framing). Aquesta reserva de drets afecta tant als continguts de la tesi com als seus resums i índexs.

This item appears in the following Collection(s)