Universitat Politècnica de Catalunya
Pedra Durán, Joaquim
2013-07-26
B. 3928-2014
156 p.
Universitat Politècnica de Catalunya. Departament d'Enginyeria Elèctrica
This Thesis study the parameters estimation of the induction machine with the single-cage and doublecage models, using the stator currents, voltages and mechanical speed from a starting transient. The dynamic equations of the induction machine are expressed in the synchronous reference frame because in this reference the values of the direct and quadrature currents have a slower variation than those in the other reference frames. This reference frame is important to facilitate the data filtering. The proposed method for the single-cage parameters estimation introduces an approximation of the rotor flux using the stator currents and voltages. It has been demonstrated in the thesis that this approximation improves the accuracy of the calculated parameters significantly. Two different methods to calculate the parameters have been developed. The first is based on the linear least-square method and the second on the resolving of a nonlinear system of equations. A detailed error study of the parameters and predicted behavior have been made in the thesis. An interesting result of the error study is that it is very important that the speed of the points be used in the calculations. It is very important to use the points with the maximum torque speed and points near the synchronous speed. The thesis presents the two first methods developed for parameters estimation of the induction machine with double-cage model using data from a starting transient. The other methods known in the literature use steady state data. Both methods use data from the point of maximum torque to the synchronous speed to calculate the parameters of a single-cage model, because the torque- and current-speed curves of this single-cage fit very well with the torque- and current-speed curves of the double-cage. Later, the first method uses a point with a speed near to zero speed and a point in the synchronous speed and other single-cage is calculated. With these two singlecages the impedances of three points are calculated and they are used to estimate the six parameters of the double-cage model solving a nonlinear system of equations. The second method, called instantaneous power method, uses the fact that the averaged transient torque has similar values to the steady-state torque in the mechanical transient region. Then, several impedance values are calculated for points with different speeds in this region, where the effects of the double-cage are more important. Finally, with impedance values in the synchronous speed and the maximum torque speed obtained with the regression method and impedance values obtained with the instantaneous power method, a set of non linear equations are defined. Their solution is the estimated parameters of the induction machine double-cage model.
621.3 Electrical engineering
ADVERTIMENT. L'accés als continguts d'aquesta tesi doctoral i la seva utilització ha de respectar els drets de la persona autora. Pot ser utilitzada per a consulta o estudi personal, així com en activitats o materials d'investigació i docència en els termes establerts a l'art. 32 del Text Refós de la Llei de Propietat Intel·lectual (RDL 1/1996). Per altres utilitzacions es requereix l'autorització prèvia i expressa de la persona autora. En qualsevol cas, en la utilització dels seus continguts caldrà indicar de forma clara el nom i cognoms de la persona autora i el títol de la tesi doctoral. No s'autoritza la seva reproducció o altres formes d'explotació efectuades amb finalitats de lucre ni la seva comunicació pública des d'un lloc aliè al servei TDX. Tampoc s'autoritza la presentació del seu contingut en una finestra o marc aliè a TDX (framing). Aquesta reserva de drets afecta tant als continguts de la tesi com als seus resums i índexs.
